BL9836-1105AC Removable Lid
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware. Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection. Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container.
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- One-piece construction, molded from lightweight, high-impact polyethylene
- INTERIOR (L X W X D)
97.80″ x 35.90″ x 16.10″ (248.4 x 91.2 x 40.9 cm) - EXTERIOR (L X W X D)
101.80″ x 39.90″ x 20.79″ (258.6 x 101.3 x 52.8 cm)
- INTERIOR (L X W X D)
| Weight | 1 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
| Color | Black |
Related products
-
Single Lid
EX448 Hinged Lid
Weather Resistant full EPMD rubber door gasket (durometer shore A53, (hardness) ). Rugged galvanized steel door hinges coated with zinc plating, clear trivalent chromate. Large detent area for labeling on front and rear which prevents scraping (scrape proof)
-
Single Lid
AL1414-0705 Hinged Lid
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container. One-piece construction, molded from lightweight, high-impact polyethylene.
-
Single Lid
AL1413-1005 Hinged Lid
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container. One-piece construction, molded from lightweight, high-impact polyethylene.
-
Single Lid
AL1616-1004 Hinged Lid
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container. One-piece construction, molded from lightweight, high-impact polyethylene.
-
Single Lid
AL2423-0911 Removable Lid
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware. Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection. Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container.
-
Single Lid
AL2221-0414 Removable Lid
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware. Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection. Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container.
